Name: 
 

Final Review Multiple Answer


Modified True/False
Indicate whether the statement is true or false. If false, change the identified word or phrase to make the statement true.
 

 1. 
The statement below is either true or false. If the statement is true, select true and do nothing else. If the statement is false, select false and type the word that would make the statement true in the space given.

Example: In the statement "The sky is green" the word "green" makes it false. I would select false and type the word "blue" in the box below.

A DHCP listing is a range of addresses available for leases.

 

 2. 
The statement below is either true or false. If the statement is true, select true and do nothing else. If the statement is false, select false and type the word that would make the statement true in the space given.

Example: In the statement "The sky is green" the word "green" makes it false. I would select false and type the word "blue" in the box below.

The DNS service automatically assigns IP addresses to computers on the network.

 

Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 3. 
The most common IP address scheme used today is:
a.
IPV6
c.
IPV4
b.
IPNG
d.
CIDR
 

 4. 
The net section of an IP address identifies
a.
The computer or node
c.
The network the computer belongs to
b.
The router
d.
The domain the computer belongs to
 

Multiple Response
Identify one or more choices that best complete the statement or answer the question.
 

 5. 
This new addressing scheme, known as ____ or ____, is the long-term solution to the limitations of IPV4.
 a.
IPv6
 c.
CIDR
 b.
IPV9
 d.
IPng
 

 6. 
Octets are split into two sections:
 a.
Net or network
 c.
Frame
 b.
Host
 d.
Router
 

 7. 
Which of the following are workarounds that are used to address the problem of running out of addresses in IPv4?
 a.
IPV9
 c.
Subnetting
 b.
CIDR
 d.
VLSM
 

 8. 
The IP address of 169.254.3.5 would be:
(Choose three)
 a.
A classful class C address
 d.
A public IP address that works on the Internet
 b.
Have the classful subnet mask of 255.255.0.0
 e.
A private address used in automatic private IP addressing
 c.
A classful class B address
 
 
nar001-1.jpg

Figure 5-4
 

 9. 
The graphic in 5-4 is known as a:
 a.
NIC
 c.
PCI card
 b.
PCMCIA card
 d.
BUS card
 

 10. 
The graphic in 5-4 is known as a:
 a.
NIC
 c.
PCI card
 b.
PCMCIA card
 d.
BUS card
 
 
Figure 4-1

nar002-1.jpg
 

 11. 
The graphic in 4-1 is known as a:
 a.
NIC
 c.
PCI card
 b.
PCMCIA card
 d.
USB NIC
 
 
Figure 4-2

nar003-1.jpg
 

 12. 
The image in 4-1 is what kind of NIC?
 a.
PCMCIA
 c.
On-Board
 b.
Boarded
 d.
Integrated
 

 13. 
Which of the following is one of the jobs/features of a NIC?
 a.
Contain a data transceiver
 e.
Work on the application layer
 b.
Modulate and demodulate a modem signal
 f.
Work on the data link layer
 c.
Determine which node has the right to transmit data at any time
 g.
Apply data signals to the wire
 d.
Work on the physical layer
 h.
Assemble and disassemble data packets
 

 14. 
What factors determine what kind of NIC to use?
 a.
Kind of computer bus
 d.
Application layer media
 b.
Connector interfaces
 e.
Transmission speeds
 c.
Type of network
 f.
Network access method
 

 15. 
What port(s) would you find on a repeater?
 a.
Input
 c.
Output
 b.
Receiving
 d.
Transmission
 

 16. 
Which of the following is a flavor of hub?
 a.
Passive
 e.
Intelligent
 b.
Active
 f.
Dumb
 c.
Massive
 g.
Repeating
 d.
Stackable
 

 17. 
Which of the following are features/jobs of bridges?
 a.
Deliver based on the IP address
 e.
Operate at the physical layer
 b.
Deliver based on the MAC address
 f.
Operate at the data link layer
 c.
Extend Ethernet networks without extending collision domains
 g.
Work only with TCP/IP protocol
 d.
Can be programmed to filer out certain kind of frames
 h.
Work only in BUS networks
 

 18. 
Which of the following are benefits of using store-and-forward switching?
 a.
Speed
 d.
Runs a FCS on every frame before passing it on
 b.
Transmission accuracy
 e.
Since no FCS is run, the frames are more likely to be error free
 c.
Can transfer data between segments of different speeds
 

 19. 
Which of the following are accomplished by routers?
 a.
Moving data between nodes on a network
 d.
Are protocol independent pieces of hardware
 b.
Integrating data of different networks running at different transmission speeds and/or protocols
 e.
Breaks up collision domains
 c.
Delivers based on the IP address
 f.
Breaks up broadcast domains
 
 
Image 4-12
nar004-1.jpg
 

 20. 
In image 4-12, the devices circled are responsible for what?
 a.
Routing data to the internet
 c.
Combining data streams
 b.
Switching data between nodes
 d.
Routing data between switches
 

 21. 
Which of the following would be considered different kinds of gateways?
 a.
Switch
 d.
Firewall
 b.
Email
 e.
Routing
 c.
Voice/data
 f.
Internet
 

 22. 
Microsoft qualifier tools can be used to determine whether the current _____ is compatible with Windows Server 2003.
 a.
hardware
 c.
protocol
 b.
applications
 d.
database
 

 23. 
Which of the following defines resources which could be shared?
 a.
Protocols
 d.
bandwidth
 b.
printer
 e.
files
 c.
hard drive space
 

 24. 
The ___, ____, and ____ file formats are standards that the presentation layer can translate on any computer.
 a.
PICT
 c.
JPEG
 b.
ANSI
 d.
ATM
 

 25. 
This would be a physical part of a network.
 a.
Printer
 d.
protocols
 b.
files
 e.
bandwidth
 c.
transmission media
 f.
router
 

 26. 
This would be a logical part of a network.
 a.
Printer
 d.
protocols
 b.
files
 e.
bandwidth
 c.
transmission media
 f.
router
 



 
Check Your Work     Start Over